SL-8 pneumo
Suspension type...........................................AL-KO
Model.....................................................................SL
Area..........................................................226 sq. ft.
Dimensions (LxWxH).................27 x 8 x 11-11.3 ft.
Truck Assignment...............office, mobile home, bathhouse, store, foodtruck
Model.....................................................................SL
Area..........................................................226 sq. ft.
Dimensions (LxWxH).................27 x 8 x 11-11.3 ft.
Truck Assignment...............office, mobile home, bathhouse, store, foodtruck
SL-8 pneumo
Description
Characteristics
Questions
General Specifications
Total Trailer Area: 226 sq. ft. (Accommodates up to 12 employees)
Body Material: Aluminum composite, 0.12 inches thick, available in a wide range of colors. Standard colors include RAL-3020 (red), RAL-5002 (blue), and RAL-6029 (green).
Interior and Flooring:
Total Trailer Area: 226 sq. ft. (Accommodates up to 12 employees)
Body Material: Aluminum composite, 0.12 inches thick, available in a wide range of colors. Standard colors include RAL-3020 (red), RAL-5002 (blue), and RAL-6029 (green).
Interior and Flooring:
- Walls and ceiling lined with stainless steel (AISI 430), at least 0.02 inches thick.
- Flooring includes 0.06-inch ribbed aluminum (quintet), 0.16-inch underlayer, 0.47-inch laminated plywood, 1.97 inches of floor insulation, and another 0.47-inch layer of laminated plywood.
- Walls are insulated with 1.57 inches of fire-resistant insulation.
- Two sets of dual headlights at the front and two sets of dual taillights at the rear.
- Lighting complies with European standards.
- Exterior lighting integrated into the top-opening window flap.
- Interior lighting includes two LED strips and additional illumination above work surfaces.
- Chrome wheel covers.
- Fire extinguisher.
- Certificate of title (with purpose and VIN).
- Window flap opening mechanism: gas lift.
- Trailer door features a tubular mechanism for parallel sliding along the trailer side.
- All interior equipment complies with HACCP (Hazard Analysis and Critical Control Points) standards. The mobitruck is certified to HACCP standards.
High level of autonomy will allow you to reach the most remote corners of any settlement
01
02
03
Autonomy
The work is not limited by weather conditions: visitors and staff comfort, safety of products, equipment, fulfillment of technical processes are ensured.
All-season
Window covers protect from sun and rain, external counter for shopping and bags.
For visitors and staff
Technical Features:
Electrical Cabinet: Wall-mounted, rated IP54, with a transparent black door. BNK 40-54-1 module equipped with an energy meter (3-phase, 5-60A, 230V, accuracy class 1, single tariff) and ABB circuit breakers. Includes residual current devices (RCDs) by ABB for each consumer group. Power rating up to 45 kW.
- Type of equipment: Food truck (chassis)
- Standard body colors: RAL-3020 (red), RAL-5002 (blue), RAL-6029 (green). Any color is available to order.
- Body material: Aluminum composite
- Thickness: 0.12 inches (3mm)
- Rubber suspension axle: Up to 3,968 lbs (1,800 kg) for 5x112 wheels for a passenger trailer – 1 piece
- Total load capacity: 7,920 lbs (3,600 kg)
- Tube profile: Hexagonal
- Wheel assembly: 195R14C8 5.5J x 14 H2 (112x5), 1,984 lbs (900 kg)
- Inertia Brake: AL-KO type 161S, designed for a triangular drawbar.
- Configuration: For a V-shaped drawbar.
- Equipment: Includes a coupling device with AK160 coupling head.
- Coupling Type: Coupling head.
- Coupling Device: AK 161S, article number.
- Hitch ball load (tongue weight): 220 lbs (100 kg).
- Automatic Support Wheel: Suitable for trailers up to 7,716 lbs (3,500 kg) gross weight, equipped with a foot pedal. The built-in thrust bearing ensures smooth operation even under heavy loads.
- Static Load Capacity: 1,102 lbs (500 kg).
- Dynamic Load Capacity: 661 lbs (300 kg).
- Outer Tube Diameter: 2.36 inches (60 mm).
- Overall Length (shaft and rim): 28.74 inches (730 mm).
- Shaft Travel: 9.45 inches (240 mm), with wheel lift of 8.66 inches (220 mm).
- Wheel Rim Dimensions (diameter x width): 7.87 x 1.97 inches (200 x 50 mm).
- Rim Material: Steel.
- Wheel Material: Rubber.
Electrical Cabinet: Wall-mounted, rated IP54, with a transparent black door. BNK 40-54-1 module equipped with an energy meter (3-phase, 5-60A, 230V, accuracy class 1, single tariff) and ABB circuit breakers. Includes residual current devices (RCDs) by ABB for each consumer group. Power rating up to 45 kW.
- Develop the concept and menu.
- Purchase a food truck with equipment that fits your concept.
- Register a legal entity.
- Rent a location with electricity to place your food truck.
- Go through all the necessary permits and inspections (health inspection, consumer protection agencies, etc.).
- Start earning money!
The advantage is that you can change locations and make more money at various festivals and events!
The truck is mainly transported on SUVs, no lower than the class of a Toyota RAV4.
Delivery to any region or country is carried out through a transport company at the customer's expense. Alternatively, you can pick up the food truck with your own vehicle and tow it as a trailer.
The walls and floor of the food truck are insulated with a double layer of insulation to avoid heat loss. There is a possibility to install a warm floor, and heat curtains over the windows and over the entrance door. Our food trucks have had a good frosty test drive in Minnesota, North Dakota, Wyoming and Vermont cities.
Along with the food truck, you will receive the title (Certificate of Title) with a special note such as 'Mobile Food Vendor' or 'Mobile Food Establishment.'
The food truck needs to be registered with the Department of Motor Vehicles (DMV) to obtain a license plate.
You can order this registration service through us.
Without your presence, we will handle all the necessary procedures, and you will pick up your food truck with the license plates already installed.
The food truck needs to be registered with the Department of Motor Vehicles (DMV) to obtain a license plate.
You can order this registration service through us.
Without your presence, we will handle all the necessary procedures, and you will pick up your food truck with the license plates already installed.
Any type.
Customers usually purchase the cooking equipment themselves, as it is typically countertop equipment that just plugs into an outlet. If the equipment requires installation, you can order it and have it delivered to our workshop by prior arrangement with us, and we will provide an invoice for the installation work.
Customers usually purchase the cooking equipment themselves, as it is typically countertop equipment that just plugs into an outlet. If the equipment requires installation, you can order it and have it delivered to our workshop by prior arrangement with us, and we will provide an invoice for the installation work.
You can use the services of our designer or hire your own.
If you choose to work with your own designer, we will provide all the necessary materials for designing your food truck.
If you choose to work with your own designer, we will provide all the necessary materials for designing your food truck.
