SL-5 V
Suspension type...........................Air suspension
Model.....................................................................SL
Area...........................................................129 sq. ft.
Dimensions (LxWxH)...............14.12 x 8 x 10-11 ft.
Truck Assignment......................store, foodtruck
Model.....................................................................SL
Area...........................................................129 sq. ft.
Dimensions (LxWxH)...............14.12 x 8 x 10-11 ft.
Truck Assignment......................store, foodtruck
SL-5 V
Description
Characteristics
Questions
Equipment:
- Standard Colors Available: Red, Yellow, Black, White.
- Body Material: 4 mm thick aluminum composite.
- Wall Insulation: 1.57 inches (40 mm) of non-combustible insulation.
- Floor Insulation: 1.97 inches (50 mm).
- Suspension: AL-KO (Germany) with an inertia drum brake and parking brake.
- Maximum Load Capacity: 7,716 lbs (3,500 kg).
- Interior Wall and Ceiling Lining: Stainless steel (AISI 430).
- Floor Covering: Corrugated aluminum (quintet pattern). Base layer: laminated plywood.
- Modular Options: Semi-spheres can be retrofitted as restrooms, offices, refrigeration, or freezer units, etc.
- Electrical Panel: Equipped with a meter and circuit breakers for each consumer group. Power capacity up to 45 kW.
- Four 220V Outlets.
- Exterior Lighting: Built into the upper window sash.
- Lower Sash Interior: Covered with welded stainless steel with minimal rivets to ensure a smooth surface when open.
- Interior Lighting: Two LED light strips.
- Additional Interior Lighting: Installed above work surfaces.
- Window Panels: Anti-vandal locking mechanism. Gas-lift opening mechanism.
- Chrome-Plated Wheel Caps.
- Certificate of Title (CT) with VIN Number.
- Fire Extinguisher.
- Trailer Door Mechanism: Pipe mechanism with guides for flat-parallel sliding along the trailer.
- All interior equipment complies with HACCP standards. The food truck is HACCP certified.
High level of autonomy will allow you to reach the most remote corners of any settlement
01
02
03
Autonomy
The work is not limited by weather conditions: visitors and staff comfort, safety of products, equipment, fulfillment of technical processes are ensured.
All-season
Window covers protect from sun and rain, external counter for shopping and bags.
For visitors and staff
The trailer drawbar has a V-shaped design.
Rubber-torsion axle rated for up to 3,968 lbs (1,800 kg), suitable for 5x112 wheels – 1 piece.
Body:
Rubber-torsion axle rated for up to 3,968 lbs (1,800 kg), suitable for 5x112 wheels – 1 piece.
- Wheel Brake: AL-KO Type 2361.
- Bolt Pattern PCD: 5x112.
- Wheel Bolt: M12x1.25 (spherical), Part No. TA2081670020.
- Bearing d80: Part No. TA1224805.
- Recommended Wheel Offset: ET 27-33.
- Wheel Hub Bore DIA: 63 mm.
- Forged AL-KO Control Arms.
- Hexagonal Tube Profile.
- Wheel Assembly: 195R14C8, 5.5J x 14 H2 (5x112), rated for 1,984 lbs (900 kg).
- Permissible Trailer Weight: 3,968 lbs (1,800 kg).
- Inertia Brake: AL-KO Type 161S, for a triangular drawbar.
- Permissible Trailer Weight: 2,094–3,527 lbs (950–1,600 kg).
- Coupling Assembly: Equipped with AK160 coupling head.
- Coupling Mounting: Horizontal, secured with 2 M12 bolts.
- Mounting Features: Top installation.
- Coupling Type: Coupling Head.
- Coupling Device: AK 161S.
- Hitch Ball Load: 220 lbs (100 kg) (or equivalents for trailers up to 3,968 lbs (1,800 kg)).
- Built-in Thrust Bearing ensures easy wheel maneuverability even under heavy loads.
- Static Load Capacity: 1,102 lbs (500 kg).
- Dynamic Load Capacity: 661 lbs (300 kg).
- Tube Diameter: 60 mm.
- Overall Length (Stem + Rim): 28.7 inches (730 mm).
- Stem Travel: 9.45 inches (240 mm) to 8.66 inches (220 mm) (wheel lift).
- Wheel Rim Dimensions (Diameter x Width): 7.87 x 1.97 inches (200x50 mm).
- Rim Material: Steel.
- Wheel Material: Rubber.
- Maximum Load Capacity: 1,764 lbs (800 kg) per support.
- Installation: To ensure maximum load-bearing capacity, the supports must be installed at the outermost points under the body.
- Maximum Height: 19.7 inches (500 mm).
- Support Length: 23.8 inches (605 mm).
- Maximum Stroke: 20 inches (510 mm).
- Material: Steel.
- Coating: Zinc.
Body:
- Made from 3 mm thick aluminum composite.
- Equipped with two sets of two headlights at the front and two sets of two taillights at the rear.
- Wall and Ceiling Lining: Stainless steel (AISI 430) with a minimum thickness of 0.02 inches (0.5 mm).
- Floor Construction:
- 1.5 mm corrugated aluminum (quintet pattern), 4 mm underlay, 0.47 inches (12 mm) laminated plywood, 1.97 inches (50 mm) floor insulation,
- Top layer: 12 mm laminated plywood.
- Wall Insulation: Non-combustible insulation 1.57 inches (40 mm).
- External Power Connection: Compatible with 220/380 V networks or an external generator via a specialized power panel with connectors.
- Electrical Panel:
- Wall-mounted, IP 40 rating, transparent black door.
- BNK 40-54-1 Module equipped with:
- Meter (1-phase, 3-phase, 5–60A, 230V, Class 1, single tariff).
- Circuit breakers (ABB).
- Residual-current device (RCD) (ABB) for each consumer group.
- Develop the concept and menu.
- Purchase a food truck with equipment that fits your concept.
- Register a legal entity.
- Rent a location with electricity to place your food truck.
- Go through all the necessary permits and inspections (health inspection, consumer protection agencies, etc.).
- Start earning money!
The advantage is that you can change locations and make more money at various festivals and events!
The truck is mainly transported on SUVs, no lower than the class of a Toyota RAV4.
Delivery to any region or country is carried out through a transport company at the customer's expense. Alternatively, you can pick up the food truck with your own vehicle and tow it as a trailer.
The walls and floor of the food truck are insulated with a double layer of insulation to avoid heat loss. There is a possibility to install a warm floor, and heat curtains over the windows and over the entrance door. Our food trucks have had a good frosty test drive in Minnesota, North Dakota, Wyoming and Vermont cities.
Along with the food truck, you will receive the title (Certificate of Title) with a special note such as 'Mobile Food Vendor' or 'Mobile Food Establishment.'
The food truck needs to be registered with the Department of Motor Vehicles (DMV) to obtain a license plate.
You can order this registration service through us.
Without your presence, we will handle all the necessary procedures, and you will pick up your food truck with the license plates already installed.
The food truck needs to be registered with the Department of Motor Vehicles (DMV) to obtain a license plate.
You can order this registration service through us.
Without your presence, we will handle all the necessary procedures, and you will pick up your food truck with the license plates already installed.
Any type.
Customers usually purchase the cooking equipment themselves, as it is typically countertop equipment that just plugs into an outlet. If the equipment requires installation, you can order it and have it delivered to our workshop by prior arrangement with us, and we will provide an invoice for the installation work.
Customers usually purchase the cooking equipment themselves, as it is typically countertop equipment that just plugs into an outlet. If the equipment requires installation, you can order it and have it delivered to our workshop by prior arrangement with us, and we will provide an invoice for the installation work.
You can use the services of our designer or hire your own.
If you choose to work with your own designer, we will provide all the necessary materials for designing your food truck.
If you choose to work with your own designer, we will provide all the necessary materials for designing your food truck.
